Reverend Guitars - Roundhouse Air HH - High Tide Blue

Custom Pickups

We design our own proprietary custom pickups, to achieve the best tonal match with our instruments. Reverend pickups are also specifically designed for each position, for balanced volume and tone when switching.

Mahogany Body

Mahogany is a medium weight wood, prized for it's beauty, stability, and tonal qualities. All Reverend semi-hollow guitars use a Mahogany back and center block, where it's midrange forward tone perfectly complements the semi-hollow construction.

Bass Contour

This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!

Pin-Lock Tuners

A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.

Initialed Headstock

Every Reverend is hand initialed and serial numbered on the back of the headstock by one of our highly skilled technicians who sets up, inspects, and tests every instrument.

Thin FInish

The paint on a Reverend is thinner than most production guitars, allowing the body to vibrate more freely, for a more resonant and lively tone. Thick finishes might look a little 'slicker', but at Reverend, tone is a top priority. Our finish is also UV cured, which means it's 100% dry from day one, unlike vintage-style nitrocellulose finishes, which can take years to fully dry.

Custom Dome Knobs

Our proprietary knobs feature a lower profile which is less likely to be accidentally hit by the player's hand, and the white dot lets you easily see where your knob rotation is set.

Boneite Nut

We use "Boneite," a synthetic bone nut, that is more consistent than natural bone, on all Reverend instruments. It reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.

Three-Piece Neck

All Reverend set-neck guitars are fitted with a three-piece neck, which is stronger and stiffer than a one-piece neck. Three-piece construction increases sustain, seasonal stability, and overall durability.

Ebony Fingerboard

All Reverend set-neck guitars are now upgraded with an Ebony fingerboard. Ebony is harder than maple or rosewood, giving it a fast and slick feel. The hardness also contributes to sustain, tight tone, and long fingerboard life.

Dual-Action Truss Rod

Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.

Custom Jack Plate

Our proprietary jack plate features four mounting screws, instead of two. The extra screws prevent the plate from tearing out of the body. Made of steel for durability, the laser etched logo adds an extra touch of class!

Pure Tone Jack

All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.

10% Pots

We use Alpha control pots with a +-10% rating. While a typical pot is +-20%, our pots are built to tighter specifications, making them more consistent. Typically used in expensive boutique guitars, but standard issue in all Reverends.

Treble Bleed Circuit

All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great!

10% Poly Caps

We use caps with a +-10% rating, while a typical cap is +-20%. Our caps are made to tighter specifications, so they’re more consistent. Made of polyester, they’re also longer lasting, and less affected by temperature than cheaper ceramic caps. Typically used in expensive boutique guitars.